Case Studies

Please find a few examples of our work below

Mackie's of scotland
In keeping with the cool theme, we hope you agree that our next project looks every bit as “cool” as the delicious Mackie’s ice-cream itself! Our lovely customer required a floor that was hygienic, low maintenance and slip resistant meeting both Environmental and Health and Safety standards. Our tailored 4mm Quartz flooring system met all 3 objectives and will give years of protection!

1.

Existing floor coatings and old screeds removed

2.

Primed then flexible quartz system applied

3.

2 Coats of sealer to ensure hygenic, abrasion resistant and long-lasting finish
Resilient LK195
Some medium long text description required here to pad out this area... Some medium long text description required here to pad out this area... Some medium long text description required here to pad out this area... Some medium long text description required here to pad out this area...

1.

Upon entering shiplift, underwater area UHP blasted and a full coat of Epoxy Sealer applied, and a further second coat of Epoxy Hi-Build applied after.

2.

A third coat was strip coated (painting all welds with brush and roller) before applying full coat of paint by spray method.

3.

Full coat is applied by spray method.

4.

Two full coats of anti-fouling applied.
Advance WY77
  • Complete system UHP blast
  • Hot Zinc Spray
  • 1 Coat of Epoxy Sealer Stripe Coat and second Coat Epoxy Highbuild
  • Stripe Coated, 1st Coat Polyurethane Finish
  • 2nd Coat Polyurethane Applied

1.

Before hydro-blasting and Hot Zinc spraying of the fish working area on the Advance WY77.

2.

After works completed on the Advance WY77
Sparkling Star BCK
Some medium long text description required here to pad out this area... Some medium long text description required here to pad out this area... Some medium long text description required here to pad out this area... Some medium long text description required here to pad out this area...

1.

Upon entering shiplift, bottom and topsides were hydroblasted. Topsides were hot zinc sprayed and 1 coat epoxy sealer applied. Bottom 1 coat epoxy sealer applied.

2.

Topsides strip coat and apply 1 coat polyurethane topcoat. Bottom strip coat and apply 1 coat epoxy tie coat.

3.

Topsides stripe coat and apply 1 coat epoxy highbuild. Bottom apply 2nd coat epoxy sealer.

4.

Topsides apply 2nd coat polyurethane. Bottom apply 2 coats antifouling.